RED DSMC V5.2 Spezifikationen Seite 148
- Seite / 197
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.2, REV-G | 148
MASTER/SLAVE OPERATION
This section describes operation in Master/Slave configuration and clip naming conventions for clips recorded
on those cameras. Master/Slave is the most common configuration for Stereo/3D productions.
When cameras are operated in Master/Slave configuration, you can perform the following operations:
Power: Turn off the Master camera to turn off both cameras.
Record: Press the PWR/REC button on the Master camera to start/stop recording on both cameras.
Change settings: Change settings on the Master camera, to change settings on the Slave camera.
NOTE: The Master camera controls metadata and basic camera parameters of the slave cameras. Any other
setting changes required by the Slave cameras must be made before recording.
SET UP MASTER/SLAVE OPERATION
1. Connect cameras using a Master/Slave Gig-E Cable.
2. On the Master camera, follow the instructions below:
A. Go to Menu > Settings > Setup > Communication.
B. Type a name for the camera (Example: CAM A, LEFT, MASTER, etc) in the Name field.
C. Set Target to All.
D. Go to Menu > Settings > Setup > Communication and select the Ethernet tab.
E. Verify the Enable Camera to Camera check box is selected.
3. On the Slave camera(s), follow the instructions below:
A. Go to Menu > Settings > Setup > Communication.
B. Type a name for the camera (Example: CAM B, RIGHT, SLAVE, etc) in the Name field.
Master Settings
- RED DSMC 1
- INTRODUCTION 8
- RED DSMC OPERATION GUIDE 10
- DSMC SYSTEM 14
- COMPONENTS 14
- DSMC BASIC 31
- OPERATIONS 31
- BASIC MENUS 42
- AND CONTROLS 42
- ADVANCED 57
- RECORD AND 126
- MONITOR AUDIO 126
- REDMOTE 133
- OPERATION 133
- MULTI-CAMERA SETUP 143
- TIMECODE, GENLOCK 143
- UPGRADE DSMC 155
- FIRMWARE 155
- MAINTENANCE 157
- TROUBLESHOOT 159
- YOUR DSMC 159
- TECHNICAL 163
- SPECIFICATIONS 163
- INPUT/OUTPUT 174
- CONNECTORS 174
- GIG-E (ETHERNET) 179
- DC IN (POWER INPUT) 180
- LENS MOUNTS 182
- AND LENSES 182
- DEFAULT KEY 191
- FUNCTIONS 191
- } Camera Info 196
- } Media Info 196
- RED DIGITAL CINEMA 197
AEG EW6S4R27W manuály
Uživatelské manuály a uživatelské příručky pro ne AEG EW6S4R27W.
Poskytujeme 1 manuály pdf AEG EW6S4R27W ke stažení zdarma podle typů dokumentů: Informační leták
Kommentare zu diesen Handbüchern