RED DSMC V5.2 Spezifikationen PDF herunterladen (Seite 166)

165

The Video Genlock input may be used as a vertical interval reference signal for the sensor and HD-SDI

outputs when precise synchronization is required between cameras, such as for 3D and live broadcasts.

Note: When GENLOCK is selected as the sensor shutter reference, shutter start timing (SHUTTER

PHASE) may still be adjusted. HD-SDI monitor outputs will automatically sync to the external

GENLOCK signal as soon as it is detected, there is no need to enable this function. Sensor shutter

sync to GENLOCK is only supported with HD-SDI.

View into camera SYNC (Video Sync) Interface connector

Mating Connector: FGG.00.304.CLAD27Z

PIN SIGNAL DESCRIPTION

1 GROUND Common Ground

2 SS/GPI Shutter Sync / GPI Trigger Input

3 TIMECODE SMPTE unbalanced timecode Input

4 GENLOCK RS170A Tri-Level Sync Input

NOTE: The Camera Brain’s Shutter Sync / GPI Trigger uses a 3.3 V Schmitt trigger (5 V tolerant),

current supplied by the trigger source. Both edges of the input signal may be used as a trigger.

For example, when GPI trigger is used for Record Start / Stop.

• Start Record: On Ground to 3.3 V transition

• During Record: Hold at 3.3 V

• Stop Record: On 3.3 V to Ground transition

• During Stop: Hold at Ground

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 239 240

Keine Kommentare

RED DSMC V5.2 Spezifikationen Seite 166