Red ROCKET-X Bedienungsanleitung Seite 22

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 45
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 21
COPYRIGHT © 2014 RED.COM, INC
RED ROCKET-X INSTALLATION INSTRUCTIONS
955-0033, REV-B | 22
9. Plug your system’s 6-pin PCIe power cable into the RED ROCKET-X. Make sure that the latch of the power
cable aligns with the corresponding slot on the RED ROCKET-X.
10. If you’re using the HD-SDI slot filler, follow the instructions below to install and connect the HD-SDI slot
filler:
A. Remove one (1) free slot bracket from the system. Depending on your PC system, you may need to use
a Phillips #1 screwdriver to remove the slot bracket.
B. Slide the HD-SDI slot filler into the empty slot so that the SDI Out B connector is toward the back.
CAUTION: Ensure that the HD-SDI slot filler or connectors DO NOT contact other components inside the
computer.
C. Secure the HD-SDI slot filler. Depending on your PC system, you may need to use a Phillips #1 screw-
driver to install a screw that attaches the HD-SDI slot filler to the computer.
D. Connect the SDI Out A cable on the HD-SDI slot filler to the SDI Out A connector on the RED ROCKET-X.
The SDI Out A connector is the right connector when the RED ROCKET-X is installed.
Connect Power to
RED ROCKET-X
Install HD-SDI
Slot Filler
Seitenansicht 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare